RFID Bolt Seals
R G Infotech Solutions provides RFID bolt seals which provides a positive barrier to unauthorised entry or tampering and are impossible to open without destroying the seal or leaving visible damage. These C-TPAT compliant bolt seals qualify as “High Security” seals and comply with ISO 17712:2013. These snapper bolts can only be used once and must be removed by bolt cutters, providing anti-theft protection as well as preventing barrier loosening and associated damage.
Protection for containers in transit
Steel bolt in a tough plastic casing
Requires bolt cutters to remove
RFID Bolt Seals
RFID Bolt seals provided by R G Infotech Solutions are highly reliable, durable, and efficient enough to resist water and to work under high temperature and high-pressure environment. These cable seals are heat resistant, chemical resistant. These C-TPAT compliant cable seals qualify as “High Security” seals and comply with ISO 17712:2013. These can only be used once and must be removed by Bolt cutters, providing anti-theft protection as well as preventing barrier loosening and associated damage. They also provides protection for containers in transit. These are of steel wire/cables in a tough plastic casing.
This is a High-Security Seal, Univocally identifies the container or the vehicle to which it is attached. It can be easily and reliably read by fixed reading units placed at transit gates or by handheld reading units manually operated by inspectors and gives back it unique code as a basic RFID seal. When compared to standard RFID seals, tamper evident RFID seals are able to permanently store into their memory the tamper event by activating a status bit named TAG TAMPER ALARM, thus providing immediate information about seal status at readings (tampered/not tampered);
The thick steel bolt is housed in a tough plastic case which is corrosion resistant and weatherproof, making this a top choice for outdoor use in sealing shipping containers. The bolt seals are compatible with many different barriers and posts, and each carries its own unique reference number for safety audit purposes.
Electrical Characteristics Of RFID Bolt Seals
Conforms to ISO 17712:2013 (H)
Air interface Protocol: ISO/IEC 18000-6C, EPC Class 1 Gen 2
Unique TID: 96 bit
EPC: ≥ 96 bit
User Memory: ≥ 128
Data retention: 50 years
Write endurance : 100,000 cycles
Read Range: up to 10 meter
Operating Frequency: 860-960 MHz
Operating Mode: Passive (Battery Less Transponder)
Ingress Protection: IP65
Operating Temperature : -30˚C to +80˚C
Storage Temperature: -30˚C to +80˚C
Attachment Method: Pin
Length : 80mm
Weight: 36.8 gram
Material: Carbon steel galvanization+ ABS
Weight: 39.7 gram
Material: Carbon steel galvanization+ ABS
R G Infotech Solutions being manufacturer provider, seller, and distributor of the wide range of NFC, Bluetooth, HF, UHF, RFID handheld reader, and RFID tags and cards provide them for clients across all industries and across the length and breadth of India. We being the RFID products and automation solution also provide these readers for inventory tracking and management, stock management, warehouse management, container management, access management, and other customized uses. We have our HQ in Gurgaon (Delhi-NCR) India and we are providing the same for more than 15 years’ and have a long list of satisfied clients, who have benefited from our readers.
RFID Keyfobs0 out of 5
R G Infotech Solutions Offers, provides a wide range of RFID Key Fobs, RFID Key Tags also popularly known as RFID Keyring/keychain Tags. RFID Fobs suit many application needs and can be typically used for access control, attendance, product identification, logistics management, industrial automation, tickets, casino token, membership, public transportation, e-payment, swimming pools, laundry and many more.
Mount on Metal Tags0 out of 5
R G Infotech Solutions carries a range of Mount on Metal RFID Tags or Metal Mount Rfid Tags designed for tagging and tracking metallic assets in the manufacturing and logistics industries. Available in both High Frequency (HF) and Ultra-High Frequency (UHF), our metal-mount RFID tags are made for metal surfaces and products. Metal mount RFID tags are typically rugged, difficult to damage, and easy to weld, screw or otherwise attach.
RFID Garment Tag0 out of 5
R G Infotech Solutions provides garment RFID tags which are extremely soft, flexible and are made to work in extreme circumstances. These tags are so thin, that it can be applied quickly and easily in multiple ways – sewn, heat-sealed or pouched – according to your wash process needs. These are designed specifically to meet the rigors of high volume, high pressure workflows to help extend the life of your assets and have been tested in real-world to ensure guaranteed tag performance and endurance.
RFID Active Tags0 out of 5
R G Infotech Solutions provides extensive range of RFID Active tags, which are comprised of readers, tags, and antennas; however, whereas passive systems require the tags to be energized by the reader, active RFID systems utilize battery powered RFID tags that require no energy from the reader to send a signal.
RFID Library Tag0 out of 5
R G Infotech Solutions provides a wide range of RFID library tags that are widely used for automatic data capture in library applications (i.e., academic, public, corporate, and other special applications). RFR G Infotech nology provides an enhanced user experience for library.
RFID Cable Seals0 out of 5
R G Infotech Solutions provides RFID cable seals or antitamper cable seals combines the mechanical security of traditional LEGHORN CABLE SEAL product together with the electronic security offered by the latest radio frequency-based automatic identification (RFID) techniques. The plastic enclosure of the seal, in robust ABS material, embeds an electronic chip tag with unique code that not only enables the automatic identification of any container or transport vehicle, which the seal is attached to, but enables also immediate, easy and reliable readings of the integrity status of the seal, by giving information about any tamper evidence.
RFID Wire Tags0 out of 5
R G Infotech Solutions provides rfid wire tags which are flexible wire-based RFID tag, that features a rugged MSOP (packaged chip) on FR4 board electronics. It has excellent read/write performance on any non-metal surface. This tag is durable enough to be embedded in concrete, plastics, fiberglass, etc and still provide reliable performance. Their flexible design allows them to be used in a wide variety of form factors. Because of their unique design, they can provide a 360° read profile to reduce orientation sensitivity. The core of this RFID tag is a small rugged circuit board with a metal wire antenna. More durable than inlay tags, these wire based tags combine strength with flexibility. A variety of encapsulations are available: high temperature Teflon or silicone, durable vulcanized rubber, and integrated cable ties. These versatile tags can be attached with a broad range of mechanical methods.
RFID PCB Tags0 out of 5
RFID UHF PCB Tag provided by R G Infotech Solutions are designed on FR-4 base material, solving the problem that tag can’t work well on the metal surface. RFID PCB Board tag systems are used widely now in management and identification of the goods and assets. It is compliant with EPC C1G2 (ISO18000-6C), mainly applied to warehouse logistics management, IT asset management, inventory management, assets management, automotive component tracking, industrial manufacturing, etc.
RFID Ceramic Tags0 out of 5
R G Infotech Solutions provides RFID Ceramic tags of ceramic material features having better permittivity, more robust when comparing with the conventional RFID tags. R G Infotech RFID provides the best-in-class ceramic RFID tags for all industrial applications.
RFID Soft Tags0 out of 5
R G Infotech Solutions Provides a wide range of anti-metal RFID tag or also known as soft tags and are self-design and self-developed product which made in special ferrite soft material with chip and inlay inside, read range up to 5 meters. These soft tags are widely used for IT asset tracking management, Item level management, asset tracking management, Hospital equipment management, Metal devices supply chain management and many more.